Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2010, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 7 Feb 2010 01:50:49 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Battery to Inverter
Comments: To: Alex Madison <alexmadison@GMAIL.COM>
In-Reply-To:  <8379ee2c1002061540k644cb08fta7e6c2792c8ae3ed@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

If you really want to use the capacity of that inverter you need more battery and 4 gauge wire minimum for a short distance. #2 is preferred. If you plan to use that much power while the engine is running the entire current path from the alternator to the battery/inverter also has to take that current load. Plan on 100 amps plus. If the inverter has a higher surge capacity you need to consider that. You need to be careful using these inverters charging batteries in small devices like laptops, cell phones, iPods, etc. It is tough to explain but the "modified" sine wave these put out are not easily filter by small power supplies like those used by those type devices. The small batteries being charged see all that ripple and will just heat up and take power. All that small stuff should be charged with appropriate 12 volt adapters. As for the indicator light that depends on how you wire it.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alex Madison Sent: Saturday, February 06, 2010 6:41 PM To: vanagon@GERRY.VANAGON.COM Subject: Battery to Inverter

I am getting ready to install a Xantrex 1000W inverter, Walmart type 41 Aux battery and a gowesty auxillary battery wiring kit into my 1989 Westfalia.

I have some questions regarding what size gauge wires from my battery to inverter and if I need a fuse/ breaker. Going to install inverter on cabinet wall behind drivers seat and batt in aux batt compartment under drivers seat. Tried to look up topic here and samba but became very confused. Anything else I need ? Please try to keep it a little simple. Also with the gowesty kit will my battery lights on the stove be showing me my aux or starting batt power. Wanting to power a light, laptop cell phone. would be great to have the capability to power power tools/shop vac but not crucial.

Cheers Alex 1989 westfalia


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.