Date:         Wed, 10 Feb 2010 09:12:10 -0800
Reply-To:     mark drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <mdrillock@COX.NET>
Subject:      Re: Headlight's wont come on (relay bad?)
Comments: To: "Danny C." <bruiserbabie@YAHOO.COM>
In-Reply-To:  <596339.43548.qm@web33908.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Make sure the jumper is getting power from the white/black wire NOT the
red/yellow, otherwise your conclusions may not hold up. With your jumper
installed do the headlights turn on/off with the headlight switch?

Mark

Danny C. wrote:
> So I found the problem. It was in the low beam high beam switch. I removed the steering wheel and un plugged the turn signal switch and wiper switch and removed then from the col-om. I took a wire and jumped the plug and the lights work. I made a small jumper wire and plugged one end into the hot wire (power wire) and then jumped to the low beam. I will leave it this way tell I can get another switch off of a good used van. Thanks for all your help.
>
>
> Danny C.
> '84 Westy (Vanny)