Date:         Sun, 21 Feb 2010 20:28:49 -0500
Reply-To:     Ken Lewis <kdlewis@NORTHSTATE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis@NORTHSTATE.NET>
Subject:      Re: testing Hall sender
Comments: To: Raymond Paquette <raymondpaquette@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Raymond,
With the ignition ON I hold the distributors center wire near the block
while turning the engine over by hand. You should get a spark AND hear the
injectors fire twice per revolution. For an easier/safer method use one of
these http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=4445

The distributors connector is too fragile for poking at with test leads.

Ken Lewis
http://neksiwel.20m.com/
in statu viae

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.