Very cool Dylan, I think I can find a similar brush for my grinder to get back there. Do have any photos of paint cleared from the outside of the seem? I'm wondering how far back I should remove the paint.
-- Matt Thyer
________________________________ > Date: Thu, 25 Feb 2010 11:36:30 -0800 > From: insyncro@yahoo.com > Subject: Re: POR 15 in the seems > To: matt_thyer@HOTMAIL.COM > CC: vanagon@gerry.vanagon.com > > > > I do this process. > I use a Snap On Crud Thug to remove all the seam sealer and gain access to the inner seam. > All you have to do is get all the rust converted or removed and it will stay away. > ALL means ALL, both inner and outer parts of the seam. > The inner part is very difficult to gain access to in certain locations. > > POR Patch has heald up well on seams that were very rusted. > I use 3m sealant when the van is a 8.5 out of 10 or better. > > Very deatailed writeups on the samba for this, including pics. > > dylan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.