And, if you remember, what the (ballpark) measurements were on the tranny section side when you were calculating what size shims you needed for the endplay. The numbers I have are way off from the numbers used as examples in the Bentley. I realize those may not be real-life examples, so I'm trying to get an idea of what others have run into in doing this.
TIA.
Cya, Robert |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.