On Mon, Feb 22, 2010 at 7:33 PM, Joy Hecht <jhecht@alum.mit.edu> wrote: > I'd be interested in the link for the source of your lights too.
Joy and all, this is one source for a lot of lighting solutions: http://autolumination.com/overhead.htm and that page has several solutions. Browse through their other pages too. On LED vs florescent I agree with what many have said. The bright LEDs are usually a very harsh blue-white light, I have two in a fixture in my rig (and direct replacement LEDs in the stock light). Downside for fluorescents is power draw. Though less than incandescent still higher than LEDs. But, if you snoop around there now are 'warm' LEDs out there. I don't remember if the source above has that option especially in fixtures that would work and fit right in our Westies. I'm still trying to find the right solution for my rig before I start stringing wire and drilling holes. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.