Date:         Wed, 24 Feb 2010 05:58:05 +0000
Reply-To:     rubatoguy@COMCAST.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <rubatoguy@COMCAST.NET>
Subject:      Re: LED Refit
Comments: To: Bob Stevens <mtbiker62@GMAIL.COM>
In-Reply-To:  <586a66171002231838i7ad5a86dmf281dcc3417329e8@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

I'm wondering if you couldn't just use the many BBQ LED lights that mount on the handle of the cover.

If the crossbar is close to the same diameter, it should be an easy fit.



http://www.amazon.com/Weber-7516-Grill-Handle-Light/dp/B000WEKNYW/ref=sr_1_2?ie=UTF8&s=garden&qid=1266991051&sr=1-2



Todd

'88 WEsty






----- Original Message -----
From: "Bob Stevens" <mtbiker62@GMAIL.COM>
To: vanagon@GERRY.VANAGON.COM
Sent: Tuesday, February 23, 2010 6:38:31 PM GMT -08:00 US/Canada Pacific
Subject: Re: LED Refit

I like this for hanging on the pop top cross member. Nice indirect light,
enough to be
able to see everything inside, without direct, brightness.
http://www.gowesty.com/ec_view_details.php?id=4515&category_id=&category_parent_id=
Part # B497
I use a carabiner clip to hold it up there.
bob

On Tue, Feb 23, 2010 at 2:36 PM, Jeffrey Vickers <jeff@vickersdesign.com>wrote:

> I installed four 171s: one over the stove, one over the rear table,
> one over the sliding door on the heater vent tunnel and one over the
> engine compartment. I'm still looking for a suitable light to clamp to
> the pop top bar to shine down from above when pop top is open.
> Something battery operated so there are no wires. I'm thinking of an
> LED light that clamps to a bicycle handlebar so it will fit the pop
> top bar.
>
> Jeff
>
>
>>
>>
>>