Date:         Thu, 25 Feb 2010 19:05:33 -0800
Reply-To:     Robert Fisher <garciasghostvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Fisher <garciasghostvw@GMAIL.COM>
Subject:      A question for anyone that has assembled an auto tranny section
              to the differential
Content-Type: text/plain; charset="us-ascii"

And, if you remember, what the (ballpark) measurements were on the tranny
section side when you were calculating what size shims you needed for the
endplay. The numbers I have are way off from the numbers used as examples in
the Bentley. I realize those may not be real-life examples, so I'm trying to
get an idea of what others have run into in doing this.



TIA.



Cya,

Robert

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.