On Thu, Mar 4, 2010 at 12:25 PM, Scott Daniel - Turbovans < scottdaniel@turbovans.com> wrote: > they also require a cone face lug nut or bolt . > And it's not exactly the same as the one used on 14 inch alloy wheels... > close, but not the same . Alloy lug nuts or bolts would work....but the > contact area is a lot larger on the alloy nut or bolt.
I've seen alloy lug bolts fail. They are prohibited on racetracks. I don't use them on any vehicle. A 'ham-fisted' mechanic with an air impact wrench can over-stress them with ease and you'd never know till they let go. You can even twist them right off 'by hand' (make the bolt shaft break using a normal lug wrench) and they sometimes seize onto a steel hub due to dissimilar metals reaction. Don Hanson |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.