Date:         Fri, 5 Mar 2010 11:17:40 -0500
Reply-To:     pdooley <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         pdooley <psdooley@VERIZON.NET>
Subject:      Re: AIR FLOW METER
In-Reply-To:  <468448.52204.qm@web52106.mail.re2.yahoo.com>
Content-type: text/plain; charset=US-ASCII

Somebody should come up with a MAF interpolator for this vehicle.
In case you don't know what that means, basically an electronic box is used
inline in the harness which then plugs into a MAF sensor.
MAFs have no moving parts and in theory should last longer.  They should
also give a slight increase in power as there is no flow restriction.  Also,
if the interpolator is calibrated for a common MAF, well then you have a
cheap source for air flow measurement.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.