Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2010, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 5 Mar 2010 12:41:34 -0600
Reply-To:     mcneely4@COX.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Mcneely <mcneely4@COX.NET>
Subject:      Re: AIR FLOW METER
Comments: To: Tom Hargrave <thargrav@HIWAAY.NET>
In-Reply-To:  <030101cabc85$acae8070$060b8150$@net>
Content-Type: text/plain; charset=utf-8

Doesn't GoWesty have something like this but will only sell it if they install it themselves? Don't they claim it works great, but that only they can get it properly adjusted? DMc

---- Tom Hargrave <thargrav@HIWAAY.NET> wrote: > Hot wire works by passing a constant current through a tungsten wire then measuring the resistance. More airflow = more cooling = cooler wire = less resistance across the wire. > > The key to having something like this work is to start with a map of the old AFM system (CFM = resistance) and a map of the hotwire system (CFM - resistance or voltage drop). Then you would build a controller that would take the hot wire measurements & supply the correct corresponding resistance to the old system. > > Thanks, > Tom Hargrave > 256-656-1924 > > Our Web Sites: > www.kegkits.com > www.stir-plate.com > www.andyshotsauce.com > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Loren Busch > Sent: Friday, March 05, 2010 10:43 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: AIR FLOW METER > > On Fri, Mar 5, 2010 at 8:17 AM, pdooley <psdooley@verizon.net> wrote: > > > Somebody should come up with a MAF interpolator for this vehicle. > > > > I assume you are talking about what some have called a 'hot wire' setup > rather than the moving vane. At least two people or groups have > experimented with that idea that I'm aware of. And ran into some problems > that are or would be difficult to get around, nonlinearities in making such > work with the existing Vanagon engine control system. Both of the attempts > that I'm aware of seem to have come to a halt, heard nothing for several > years now. > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.733 / Virus Database: 271.1.1/2718 - Release Date: 03/05/10 01:34:00


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.