I believe it's a tiny screw. really tiny. on the underside of the handle. at least on an 85 to 91 sliding door outside handle it is.
----- Original Message ----- From: "Will Taygan" <lists@ALASKABIODIESEL.ORG> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, March 15, 2010 10:46 AM Subject: rekeying sliding door lock
> Looking at Alastair's blog inspired me to rekey my '82s sliding door > lock. (PO put in a later/longer handle with a different key) > > It looks like a punch(?) being used? Anyone have a DIY source for the > tools/parts/instructions needed to punch(?) this out and replace the > pin/screw or whatever is holding the tumbler in? > > http://shufti.wordpress.com/2010/03/05/lock-info/b68vm-2/ > > Thanks, > > Will in Alaska. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.