Your van could have ATE or Girling calipers. Both are interchangeable but I prefer a matched set on both sides. Both use the same pads. As for upgrading to better brakes, you need the later spindles. They will bolt right up. You also need the later hoses. The big brake kits do require larger wheels. Really good pads and rear shoes will make the stock brakes work a lot better. The rears do contribute a lot so good shoes here are a must. The dealer shoes are metallic's and they make a big difference. Get ATE cylinders for the rear also. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of B Feddish Sent: Sunday, March 21, 2010 4:54 PM To: vanagon@GERRY.VANAGON.COM Subject: Is this the right caliper? Does anyone know if this is the right caliper to buy
http://www.busdepot.com/details.jsp?partnumber=251615108
for my 83.5?
http://www.feddishbasses.com/vw/brakes.html
Thanks, Byan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.