Thanks to those that responded so far. Sorry I wasn't clear enough in my description. All I have is the housing and the motor assembly that includes a white-ish colored plastic receptacle. I do not have a mirror, or the piece on the back of a mirror that mounts to the motor receptacle on the motor.
If I could come up with something to attach to the receptacle, I was just planning on taking the glass out of one my broken standard mirrors and using it by gluing or using tape. It's a bit smaller, but wouldn't be too noticeable.
David Wilhite
----- Original Message ----- From: dlwilhite@comcast.net To: vanagon@GERRY.VANAGON.COM Sent: Wednesday, March 17, 2010 10:37:33 AM GMT -06:00 US/Canada Central Subject: Power Mirror Insert
I've got a power mirror housing that's missing the mirror and the cost of a replacement mirror is too much for me, so I may have to rig up another mirror plate. Does anybody have a picture of what the backside of a power mirror insert looks like? Better yet, has anyone made their own insert?
Thanks, David Wilhite 84' Westy Middle TN |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.