Date:         Tue, 16 Mar 2010 18:43:37 -0400
Reply-To:     pdooley <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         pdooley <psdooley@VERIZON.NET>
Subject:      Re: Peel N Seal RE: Dynamat...
Comments: To: Peter DiFalco <peter.difalco@GMAIL.COM>
In-Reply-To:  <d3b2fe671003161456x7602e041x17b67703c0f9a3fc@mail.gmail.com>
Content-type: text/plain; charset=US-ASCII

CO, yeah- it comes out of tail pipes too.  You breathe it every day while
following that car ahead of you.

I ride with the windoze down so fresh air can replace the killer gas, but
either way I seriously doubt the mat is gonna out-gas enough to kill you or
even make you drowsy.



-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Peter DiFalco
Sent: Tuesday, March 16, 2010 5:56 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Peel N Seal RE: Dynamat...

My only comment on this subject is that Peel-n-Seal is rubberized asphalt,
not butyl rubber.  Asphalt contains a number of chemicals and it can / will
release some gasses due to thermal breakdown. You can look up the materials
sheet for rubberized asphalt to confirm this. One of those gases, actually
the first one listed is carbon monoxide.

Know what carbon monoxide smells like? Neither does anyone else.

You pays your money and you takes your chances.

-Peter

On Tue, Mar 16, 2010 at 2:37 PM, Jeff Lincoln <magikvw@gmail.com> wrote:

> On Tue, Mar 16, 2010 at 5:25 PM, pdooley <psdooley@verizon.net> wrote:
>
> > Another vote for PnS.
> > I didn't notice any off gassing, the stuff sticks fine if applied with a
> > roller to clean metal, and it's way cheaper.
> >
>
> Like I said that was my experience as well - even in very hot weather I
> noticed no off gassing of any kind. Stuff sticks great.
>
> --
> Thanks,
>
> Jeff
> '85 GL (Gertie)
> '90 Carat (Grover - the noble parts donor)
> '86 (We call this one Scrap)
> '78 Bus (Melissa) Patty's Bus
>