Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2010, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 16 Mar 2010 19:47:25 -0400
Reply-To:     craig cowan <phishman068@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         craig cowan <phishman068@GMAIL.COM>
Subject:      Re: Peel N Seal RE: Dynamat...
Comments: To: Jeffrey Vickers <jeff@vickersdesign.com>
In-Reply-To:  <EC4EA8FC-0FDC-4677-AE99-ABADD259F5D1@vickersdesign.com>
Content-Type: text/plain; charset=ISO-8859-1

I performed a series of experiments this summer that I can now disclose.... These experiments were conducted strictly for the purposes of disproving certain nay-sayers that reside in our Pittsburgh Vanagon Club in regards to this very subject, so I did the following.... I filled the inside of my front doors with Peel-n-Seel product, rolling it on with an edge band roller and a hair dryer. I then proceeded to place a small patch of Dynamat inside my sliding door (for no effective soundprofing purposes, simply adherence and gassing). I then proceeded to live in the desert. A thermometer inside my car which measured interior car temps and interior fridge temps kept me informed. My highest recorded interior car temperature was 180* (SERIOUSLY), at that temperature, the candle I keep in the sink for nighttime illumination had melted (It's in a glass container, but the wax was liquid). I routinely drove around with my windows up, and just the air vents open.... In the deserts around Reno NV. NEVER did i smell anything. I waited untill it had cycled a year including a serious cold winter, and I can now say, the Peel-n-seel product has not sagged one bit, it's still stuck perfectly to the panels and makes a substantial difference, even just in the front doors! I plan to do my next van completely in the material.

On an equally positive note, I've learned that my dometic fridge is capable of maintaining a 90* difference in temperature : ) (It was only about 80* in the fridge at the time).

Also: chocolate, in the desert, doesn't work.

-Craig '85GL turned WESTY BOSTIG in the back Headin East this year.

On Tue, Mar 16, 2010 at 7:26 PM, Jeffrey Vickers <jeff@vickersdesign.com>wrote:

> I've got a Syncro full of the stuff that's been in temps well over > 120F and there's no smell or melting or any other shenanigans. Been in > there 5 years. Feel free to buy Die-no-mat at $20 a square foot though > - you'll be doing your part to end the recession... + ) > > > On Mar 16, 2010, at 4:03 PM, Automatic digest processor wrote: > > Date: Tue, 16 Mar 2010 15:51:03 -0700 >> From: Jeff <vw.doka@GMAIL.COM> >> Subject: Re: Peel N Seal RE: Dynamat... >> >> >> I've heard a few horror stories about Peel N Seal here in Sacramento. >> Mostly from the fumes when the inside temperature of the vehicle >> hits 120+ >> in summer. >> >> Not easy to remove either... >> >> Cheers, >> >> Jeff >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.