Date:         Tue, 16 Mar 2010 20:26:16 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: first try = first run
Comments: To: Ry <rylincoln@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

to be really sure that oil is dispersed throughout the trannie .....
with the rear wheels off the ground, drive it in gear a minute or two. (
assuming it's  a 2WD vanagon )

I once read instructions that came with a new rebuilt trans - they said that
if you idle it in neutral a lot, even full of oil...
oil does not get spread around in the trans properly. Makes sense too.

so if it was dry, and now has oil ....run it in gear in the air for a couple
of minutes.


----- Original Message -----
From: "Ry" <rylincoln@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, March 16, 2010 5:17 PM
Subject: Re: first try = first run


>I did start it for about 45 seconds with clutch pushed in. The tranny is
>now
> full of oil.
>
> On Mar 16, 2010 7:09 PM, "miguel pacheco" <mundopacheco@gmail.com> wrote:
>
> Maybe a couple of fouled plugs.  I'm hopeful you didn't run it with no
> oil in tranny too!
> Miguel
>
> I have not failed. I've just found 10,000 ways that won't work.
> - Thomas A. Edison
>
>
>
>
> On Tue, Mar 16, 2010 at 5:31 PM, Ry <rylincoln@gmail.com> wrote:
>> ok so I made a mistake.  i had...