What model did the engine come out of? Syncros mount the engine lower from the body and at a different angle. Some parts are different because of this. Mark TJ Hemrick wrote: > Has anyone had their coolant bottle not line up after R&R their engine? I > bought a really nice used engine and after I got it into place (tranny bolts > and cradle bolts secure) I noticed the heat shield was really close to the > A/C clutch. I hoped securing the heat shield would position it better but I > had to fight (and lost) to get the coolant bottle intalled. I guess I could > take the engine down and bend the shield all to heck but I'm sure once I > line the bolts up on that go throught the shield and the motor mounts, the > alignment will be off again. Anyone had this happen or have an idea what > gives? It's the original heat shield and it's an 87 GL Automatic. > > Thanks, > > TJ > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.