Date:         Tue, 23 Mar 2010 12:16:13 -0600
Reply-To:     Bob Stevens <mtbiker62@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@GMAIL.COM>
Subject:      Re: Solder cracked steel coolant pipe?
In-Reply-To:  <d3b2fe671003231052x481f86b8udd6235c9f3e46fe8@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Robert,

"permanent fix" I'm not so sure of, but I do know that Gorilla Tape will
seal a "wound" like this and over time the seal will get better and better.
The tape hardens with heat and time and is particularly well suited for this
kind of "trouble". It becomes epoxy-hard with heat in particular. Even well
suited for exhaust repairs.

Apparently this pipe/tube is completely exposed and you have access to it
currently, which would make application of the tape easy. Do some googling
of Gorill Tape and see what you think of its attributes to treating the
condition you describe.

bob



On Tue, Mar 23, 2010 at 9:53 AM, Robert Keezer <warmerwagen@yahoo.com>wrote:

> Ok- So I have a  friend who came over yesterday and soldered a one inch
> crack in one of the steel coolant pipes which cracked above the gas tank.
> I don't trust it, but he persuaded me.
>
> If it fails , it will mean removing the gas tank again, and I need a
> permanent fix because I'm selling this Vanagon.
>
> Thanks
> Robert
> 1982 Westfalia