Date:         Sat, 27 Mar 2010 14:07:21 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Should Rear Brakes Bleed Slower than Front?
Comments: To: neil n <musomuso@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Wouldn't the 'slower' bleeding of the rear brakes be due to the presence  of
the Pressure Limiting Valve ( for the rear brakes ) you just wondered about
in your previous post ?

I think so.

Scott


----- Original Message -----
From: "neil n" <musomuso@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, March 27, 2010 12:38 PM
Subject: Should Rear Brakes Bleed Slower than Front?


> Hi all.
>
> Now that I have a nice DIY pressure bleeder:
>
> http://tinyurl.com/yhbumrf  (Yes it's pink. It was also 10% off  ;)
>
> and can see what's coming out the hose, I'd like to make sure of
> something.
>
> With 10-12 PSI in pressure bleeder, rears bleed ~ 1/2 as fast as
> fronts But comparing a front and rear bleeder screw, small hole
> appears to be the same ID.
>
> Do rears bleed slower because there is one long line split to each
> cylinder?
>
> (can't recall how lines route up front. Can't see a pic in Bentley or
> online)
>
> Neil.
>
>
>
> --
> Neil Nicholson '81 VanaJetta 2.0 "Jaco"
>
> http://tubaneil.googlepages.com/
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines