Date: Wed, 31 Mar 2010 23:16:35 -0400
Reply-To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject: Re: YABT: Yet another brake thread... :-(
In-Reply-To: <t2v1250b1e91003310704see91bd4ehe147d5ed014361f7@mail.gmail.com>
Content-Type: text/plain; charset="US-ASCII"
Last time I ordered dealer wheel cylinders they were made in Brazil and did
not have the springs.
The dealer price for the proper spring kit is very reasonable. You also want
to consider the dealer rear shoes. Full 6mm thick riveted linings, FG
friction rating. Some good stopping power.
Dennis
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Shawn Wright
Sent: Wednesday, March 31, 2010 10:04 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: YABT: Yet another brake thread... :-(
Dennis,
I've already ordered the spring kit from busdepot, so hopefully they are ok
- I recall your recommendation on the shoes and cylinders, but missed this
part about the hardware kit. I will check my local supplier on the wheel
cyls, and if in doubt will only get one, then find a pair of proper ones
later. I'll dissect my failed unit to see what type it is, since it was
installed by the dealer. Our local parts guy happens to run a business out
of the dealership, so I have the chance to compare dealer vs aftermarket
parts all in one shot.
Thanks everyone!
On Wed, Mar 31, 2010 at 3:19 AM, Dennis Haynes
<d23haynes57@hotmail.com>wrote:
> Yes, get the brake spring kit from the dealer. The aftermarket kits
usually
> have the wrong hold down pins and retainers.
>
> Wheel cylinders from the dealer can be hit or miss. You want the ATE's and
> you want them with the spring pushing the two pistons out. The spring was
> added with the self adjusting brakes. The spring prevents the pistons from
> retracting and causing that need to pump the pedal for good feel.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Alistair Bell
> Sent: Wednesday, March 31, 2010 2:05 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: YABT: Yet another brake thread... :-(
>
> right you are Jake, i made sure the one I bought had that spring.
>
> alistair
>
>
>
> On 30-Mar-10, at 10:42 PM, Jake de Villiers wrote:
>
> I think Dennis says to buy both the slave cylinders and the shoes
> from the
> dealer.
>
> The cylinders have the return springs and the shoes have a semi-metallic
> lining.
>
|