Date:         Fri, 9 Apr 2010 14:01:23 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Rear Pressure Leak - Tips and Tricks Requested
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

The rear pressure sensor is leaking. It is a PITA location and I can't
get to it with anything I have. 24mm deep socket to cleat the switch
(like a spark plug wrench) doesn't leave me enough room to get a driver
in there to turn the socket. A shorter socket doesn't clear the end of
the switch.

Anyone with experience with this got any suggestions???

Thanks

--
John Rodgers
Clayartist and Moldmaker
88'GL VW Bus Driver
Chelsea, AL
Http://www.moldhaus.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.