Good to know. In hindsight, one could measure new rubber bushing and strut arm diameters. Measuring length of old part should suffice. Neil.
On Tue, Apr 20, 2010 at 10:37 AM, mark drillock <mdrillock@cox.net> wrote: > I think they are available again somewhere. I made some from stainless pipe > that are not quite the right outer diameter, though they do barely squeeze > into the rubbers. > > Mark > > neil n wrote: >> >> On Tue, Apr 20, 2010 at 9:16 AM, neil n<musomuso@gmail.com> wrote: >> Beware that the metal sleeves are likely NLA.
-- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.