Still have the slider to finish, but here are some before and after pics. Bought 6 rolls($100) and will have just a little bit left. That will do both front doors, front cabin area, slider, and panel behind driver(opposite the slider). Tips: Don't attempt on a really warm day. Don't atempt on a really cold day. Heat gun really sets the material and will be a real PI to remove. Almost felt bad covering the pristine white panels in the back area. BTW-If you have ever gotten your hand up inside the candy or soda vending machine, you will have no problem with the door panels. If you are a ham-fisted oaf, you know who you are, then don't try it. http://picasaweb.google.com/sandwichhead/45010101?feat=directlink Michael in San Antonio 91GL Weekender AT 2.1L 'Gringo' 73 Beetle |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.