Date:         Sat, 24 Apr 2010 13:48:28 -0600
Reply-To:     Thomas Buese <tombuese@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Thomas Buese <tombuese@COMCAST.NET>
Subject:      How to wire Intermittent wiper relay & wiper if not factory wired?
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

Ok, if you have been following my saga, you know that my 84 westy did
not come w/ an intermittent wiper relay or the wiring to make it work
when I put one in.  So got out Mr. Bentley this am & perused pages
97.10 & 97.34 to see if I could tell from the wiring diagrams & the
relay where I might connect them so the intermittent switch would be
powered.

Alas, no such luck-it appears that I have 1or 2 unaccounted prongs on
the 99 relay, a "I" & a "53S".  Is the "I" prong for intermittent
switch?  I can't see any reference to it in my Bentley which was
published in 83 for 80-84 models.  Also, where would 1 attach the wire
if it can be done to the wiper motor?

YHWBA,

Mr. BZ-53M, 53S, T, 31, 15, & I  prongs-what else could 1 ask for?