Date:         Sun, 25 Apr 2010 12:10:12 -0400
Reply-To:     Chris S <szpejankowski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris S <szpejankowski@GMAIL.COM>
Subject:      Re: Peel and Seal Complete-Pics
Comments: To: Michael Sullivan <sandwichhead@gmail.com>
In-Reply-To:  <s2i5ebe10a1004250654z1bdb7f5chd920025e3110249@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

I meant to type 'do not get sufficiently dampened'.

Darn iPhone :-)

2010/4/25, Chris S <szpejankowski@gmail.com>:
> Nice work!  As you pointed out this wll help with resonant sound
> transmission. You may want to consider some closed cell foam material
> to help reduce sound waves which do get sufficiently reduced by
> dampening panel movement.
>
> 2010/4/23, Michael Sullivan <sandwichhead@gmail.com>:
>> Still have the slider to finish, but here are some before and after pics.
>> Bought 6 rolls($100) and will have just a little bit left. That will do
>> both
>> front doors, front cabin area, slider, and panel behind driver(opposite
>> the
>> slider).  Tips: Don't attempt on a really warm day. Don't atempt on a
>> really
>> cold day. Heat gun really sets the material and will be a real PI to
>> remove.  Almost felt bad covering the pristine white panels in the back
>> area.
>> BTW-If you have ever gotten your hand up inside the candy or soda vending
>> machine, you will have no problem with the door panels.  If you are a
>> ham-fisted oaf, you know who you are, then don't try it.
>> http://picasaweb.google.com/sandwichhead/45010101?feat=directlink
>> Michael in San Antonio
>> 91GL Weekender AT 2.1L 'Gringo'
>> 73 Beetle
>>
>
>
> --
> Chris S.
> "No solution is too complex to be executed incorrectly"
>


--
Chris S.
"No solution is too complex to be executed incorrectly"