it is kinda cool, has WD40 in the test mix, and it doesn't seem to be that bad. LPS2 (not "3") is tested, seems to be the best. Who knows how a homemade waxoyl formulation would fare, or one with lots of lanolin in it. I like lanolin for rust prevention, and attention David B, I found lanolin to work well on the threads of a galvanised shackle on a mooring set up, in preventing galling. alistair
On 7-May-10, at 10:39 AM, Matt Thyer wrote: Very cool Alistair, I'll have to finish reading this tonight and I might then go look for the mentioned US Army studies. This weekend I'll be applying a very experimental coat of POR 15 to the inside floor of Zeno. Photos and review to follow. Matt Thyer |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.