Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2010, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 4 May 2010 11:42:58 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Fuel Level Sender: Get Stuck? Knock it Loose?
Comments: To: Mike South <msouth@gmail.com>
In-Reply-To:  <p2mc56d3711005041116m132e894bz3a998c0c0e513dd8@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Yah I didn't have any of that fancy silicone tape, but I super glued it back together.

http://tinyurl.com/yddjvcd

It's on 197 or 97 south in OR.

In hindsight, not absolutely certain it was a tumbleweed. Maybe sage brush in that area?

Just sayin. In case you want to try it out. ;)

Neil.

On Tue, May 4, 2010 at 11:16 AM, Mike South <msouth@gmail.com> wrote: > Did you go back and look for the tumbleweed?  I would like to try > running over it and see if it fixes mine. > > :) > > mike > > On Tue, May 4, 2010 at 1:11 PM, neil n <musomuso@gmail.com> wrote: >> Hi all. >> >> ~ 2 years ago, I installed a new tank, sender, seals etc. Pretty sure >> gauge was hinky before parts installed, but for sure, after install, >> it read 1/2 - 2/3 when tank full. >> >> On my last trip, I ran over a tumble weed. (judgement call) This >> caused a minor "thump" on the underside. Now my fuel gauge >> consistently reads properly. >> >> Can a sender get stuck, then UNstuck with a thump like that? Nothing >> else changed that I know of. >> >> Originally, I assumed I had installed the sender in the wrong >> position. Curious because if one has similar symptoms/situation to >> mine, maybe judicious raps on tank with mallet/wood block could knock >> sender loose.  (?) >> >> Pretty sure wiring was NOT jostled into proper operation by tumbleweed >> thump, but can't say for sure. >> >> Neil. >> >> -- >> Neil Nicholson '81 VanaJetta 2.0 "Jaco" >> >> http://tubaneil.googlepages.com/ >> >> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines >> >

-- Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.