a Z -bed rear seat ? if it's one of those , very nicely..... each cushion parts unbolts or unscrews from the frame mechanism. large phillips screws for the back portion. 13mm hex head bolts for the bottom cushion. remvoe those, and the frame part is fairly light and easy to dea with, and pretty much comes right out. scott www.turbovans.com
----- Original Message ----- From: "Milt Schullian" <parillamilt@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, May 13, 2010 9:44 PM Subject: Rear seat removal
Hello, I thought I'd better check with the group before I do this. I'm in the middle of sound deadening the van and need to get at the rear quarter panel which is blocked by the rear seat. The bench seat is a fold-out bed. Is this an easy job, or a spring loaded nightmare to put back in place? It seems that I'd have to fold the bench forward to get at the front bolts. What is the removal procedure? ---Milt |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.