Date:         Tue, 11 May 2010 11:29:25 -0400
Reply-To:     craig cowan <phishman068@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         craig cowan <phishman068@GMAIL.COM>
Subject:      Vanagon Gas Tank/Fuel System measurements
Content-Type: text/plain; charset=ISO-8859-1

So I have this '85 bus which has been plagued with gas tank problems.
I have a brand new tank from Ken Willford at Vanagain that's going in today.
It has an 11mm outlet, which i believe is the same size as the stock one
(But can't get under the bus at this time to check).
As I recall, the inlet to the fuel pump is also 11mm. Right? Then the outlet
to the fuel pump is smaller..... 7mm?

I know the current system I have is very gerry-rigged with it's fuel filter
and I plan to do it right this time. So..... the large metal filters which
normally go after the fuel pump, are 7mm on both sides? Or do I have this
mistaken?

I planned not to use the plastic prefilter if I can avoid it, but if i need
to pick one up as an adaptor i need to know ASAP.

-Craig
'85GL turned WESTY
BOSTIG in the back