Date:         Fri, 14 May 2010 17:45:10 -0500
Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Sullivan <sandwichhead@GMAIL.COM>
Subject:      Re: door chime/seat belt light anomaly
Comments: To: Alistair Bell <albell@shaw.ca>
In-Reply-To:  <743A4297-5726-402A-8B2F-DFD02F767830@shaw.ca>
Content-Type: text/plain; charset=ISO-8859-1

Its been discussed and solved here b4 but cannot find it in archives yet.
Michael in San Antonio
91GL Weekender AT 2.1L 'Gringo'
73 Beetle


On Fri, May 14, 2010 at 5:32 PM, Alistair Bell <albell@shaw.ca> wrote:

> no. don't cut any wires. you can just remove grey female spade from
> door contact switch and tape up.
>
>
> as to headlight on alarm, sure, simple buzzer can be rigged, but oh
> how sweet it would be to re-purpose door chime
>
> alistair.
>
>
>
>
>
> On 14-May-10, at 11:52 AM, george jannini wrote:
>
>  To stop the door open chime, disconnect battery ground, remove the
> door switch, cut and tape the grey wire.
>
>  My "you left the lights on dummy" alarm is a 12 volt piezoelectric
> buzzer connected between fuse # 11 (wipers) and fuse #20 (license
> plate light)  You can find the part at Radio Shack.
>
> http://tinyurl.com/2boa7tt
>
> George/ATL
>