84 with a 1.9 rebuilt to a 2.1, so I have the temp2 sensor that unscrews..... > Date: Wed, 19 May 2010 14:33:42 -0700 > From: scottdaniel@TURBOVANS.COM > Subject: Re: Temp2 removal, best way to get at it?? > To: vanagon@GERRY.VANAGON.COM > > do you have the 2.1 plastic thermostat housing where the Temp II sensor is > located ? > > If so, no hoses need to be removed. The sensor is held in with a clip , and > there's an o-ring there. > > if you have a metal sycnro 2.1 t-stat housing, the sensor unscrews. > > if you are running your 2.1 with an '84 1.9 cooling system, the temp sensor > unscrews, from the 1.9 type waterpump/t-stat housing. > > never any need to remove a hose. > yeah, which of those 3 possible layouts do you have ? > > Scott > ----- Original Message ----- > From: "Bob Mund" <ob2420@MSN.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Wednesday, May 19, 2010 12:16 PM > Subject: Temp2 removal, best way to get at it?? > > > I have an 84' with a 2.1 and power steering and need to get my temp2 sensor > out. What is the best way to get at it. Looks like I may have to > disconnect a hose to its left (looking from the top down to it) maybe get at > it from underneath? > > > > Bob > = |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.