Yep, fill it to the hole as I do or nearly to the hole as others do, it won't make any difference. If you are leaking from the axle flange seals I put a writeup in the archives a few years back. Jim On Thu, May 20, 2010 at 3:50 PM, craig cowan <phishman068@gmail.com> wrote: > I've been leaking a bit of tranny fluid out one of the drive axles (well, > it > isn't actually getting into the CV, just leaking before it) for a bit now. > Slow leak. I just went to investigate and put in more fluid, and i'm > wondering what the spec on "how full" it should be? > I remember hearing you should be able to touch fluid when you stick your > finger in the fill hole? > 4 speed manual tranny. Any quick answer would be a good one. : ) > > > -Craig > '85GL turned WESTY > BOSTIG in the back > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.