Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2010, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 20 May 2010 10:11:35 -0400
Reply-To:     Jack Reynaert <jack007@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jack Reynaert <jack007@COMCAST.NET>
Subject:      Re: Bypassed DIS
Comments: To: Bob Mund <ob2420@MSN.COM>
In-Reply-To:  <COL123-W5235FE739D5051ED920F46CCE30@phx.gbl>
Content-Type: text/plain; charset="US-ASCII"

Assume you have a 1.9L??? What year is your Vanagon?

The way to test the DIS is to bypass it, and see if the idle stabilizes, if you have been running the van that way for two years, and just recently had an issue with stalling, my guess is that your problem isn't related to the DIS but something else like:

AFM or Vacuum leak Bad or corroded wires to any of the large number of sensors in the engine area Failing distributor or rotor Plug wires Bad ground or Vanagon syndrome Dirty injectors, fuel filter, plugs God forbid, bad heads (do a leak down test checking engine compression)

Jack 84 Westy, owned since 1987 with 1.9L, replace motor with 2.1L in 2008

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Bob Mund Sent: Thursday, May 20, 2010 9:44 AM To: vanagon@GERRY.VANAGON.COM Subject: Bypassed DIS

So I just discover that my van does not have the DIS (Digital Idle Stabalizer)and has been bypassed by plugging the two plugs together. I've only recently starting working in the engine area, fuel line replacemet, clean grounds, etc.... I've had the engine die when coming to a stop and then not starting the past few weeks which is why I've been spending time in the engine. (enjoying the learning process) While reading posts and researching topics found out there is no DIS and van has been on bypass since I've owned her. Almost 2 years....

My question is once I put in a new DIS and then calibrate the idle per Bently is there anything else that I should be concerned with due to the bypass? I don't know how long it's been this way before I purchased the van? Anyone have any experience with this? Thanks...

Bob = No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.819 / Virus Database: 271.1.1/2875 - Release Date: 05/20/10 02:26:00


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.