Date:         Thu, 20 May 2010 15:02:41 -0600
Reply-To:     Bob Stevens <mtbiker62@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@GMAIL.COM>
Subject:      Re: transmission fluid level
In-Reply-To:  <AANLkTiktb8T3HG-HV24ftK3JWwFUlc3ZXWHP72iSjVsM@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

>
> i'm wondering what the spec on "how full" it should be?
> I remember hearing you should be able to touch fluid when you stick your
> finger in the fill hole?
>
>
Yes. About 1/4" below the fill hole is fine. Given you are leaking through
the seal
at one of your flanges, keeping it topped up to just below would be a good
idea
to maintain.
I like using a simple pump. I find it easier to use and easy to carry with
if desired.
bob

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.