Date:         Fri, 21 May 2010 06:44:28 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Manual Shifter Woes
Content-Type: text/plain; charset="US-ASCII"

In a message dated 21/05/2010 12:05:58 A.M. Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

        If adjustment at the  shifter as described in the Bentley does not
fix your problem then ypo need to  re-adjust the link on the joint of the
rod near the rear of the fuel tank.   The rod is actually a two piece assembly
and they can be rotated left or right  to get the proper alignment to pick
up all the gears.



>>>>>I had to replace the shifter ball on my 4-speed  manual transmission
in my
1991 GL.  Now I can't get into  reverse.  I push down and over, and it goes
into first.  I'm  following the Bentley procedure to align the shifter.  I
am
missing a  plastic tab on the front shift rod, but didn't think that would
be
that big  of an issue.  Anyone else run into this?  Any ideas or  guidance?

I have to say, trying to get the shifter lined up has been  one of the most
frustrating jobs I've done on my  Vanagon.<<<<<<





Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://frankcondelli.com/trainsal.htm) )
_Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://frankcondelli.com/exhaust.htm)
_BusFusion_ (http://www.busfusion.com/)  a VW Camper  camping event,
Almonte, ON, June 10 ~ 13,  2010