Date: Wed, 26 May 2010 12:57:25 -0400
Reply-To: Don Hundt <dhundt@BENDBROADBAND.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Don Hundt <dhundt@BENDBROADBAND.COM>
Subject: Re: Good types of drive-on lift ramps?
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response
Rocky,
Here is how I've done it with lumber (2x10) The bottom board can be as long
as you want it, simply cut pieces of lumber, each piece being a couple
inches shorter than the previous, stack them in order with one end lined up
so it makes a ramp on the other end, nailing or screwing each board to the
previous as you go. You can attach a small stop to the end of the top
board(leave room for this) so you dont drive off. Lay them in your driveway
and drive on. you can make them any height you desire (might want to sketch
it out first so you get your lengths correct), and drive on. Presto, world's
strongest ramps.
Don
----- Original Message -----
From: "Mike "Rocket J Squirrel"" <camping.elliott@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, May 26, 2010 11:58 AM
Subject: Re: Good types of drive-on lift ramps?
> David Beierl wrote:
>> At 06:27 PM 5/25/2010, Rowan Tipton wrote:
>>> I've got jack stands but they are VERY unsafe on my unlevel driveway.
>>> I use my floor jack to jack up a corner of my van, put a ramp (4 ton
>>
>> Rowan, MIke -- make yourself some wooden pads that match the angle of
>> your driveway. Stick some ~1/8" steel on the top to take the puncture
>> loads from the stand feet. Hey Presto -- instant level driveway.
>
> The only part about this is I'm having a hard time picturing what to put
> the floor lift on to lift the end of the vehicle which is sitting atop
> the wood pads.
>
> Say I need 8'' of wood pad to park the downhill end of the van on to
> make it level when it's on the driveway. Lifting the uphill (unpadded)
> side with a floor jack is easy. Once that end is up on jackstands, I
> need to lift the other side to make the van level.
>
> Either I use a very high lift jack (normal + 8'') or build an additional
> platform for the jack. Put the jack on it to lift the van, bearing in
> mind Scott's warning about not letting the jack tug the van off the
> first two stands, then put in the other two jackstands.
>
> I don't know how much lift one can expect from a small floor jack (which
> is all I have room for, have not bought yet, Harbor Freight has a small
> two-ton model for $30). I figure this would be good to know before
> shopping for the wood bits to build the pads. Maybe I'll first buy the
> jackstands and the floor jack and do some prep work with a tape measure.
>
> --
> Mike "Rocket J Squirrel" Elliott
> 84 Westfalia: Mellow Yellow ("The Electrical Banana")
> 74 Westrailia: (Ladybug Trailer company, San Juan Capistrano, Calif.)
> Bend, OR
> KG6RCR
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 5148 (20100526) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
|