Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2010, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 24 May 2010 17:35:10 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: 2.1L engine failure?
Comments: To: Jack Reynaert <jack007@COMCAST.NET>
In-Reply-To:  <00e601cafb8a$b6c9fd70$245df850$@net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Tapping/knocking on acceleration - likely rod knock. When followed by sudden engine stoppage - probably catastrophic engine failure. Sounds like new engine time.

Before anything else - drain the oil through a fine paint strainer. It there is metal - dead engine. Also pull the oil filter and cut it open, washing out the contents and spreading over a white cloth or paper towels. Lots of metal - dead engine. Next, see if you can turn the engine over by had (with plugs removed of course). If no turn - dead engine.

Just my $0.02.

John Rodgers Clayartist and Moldmaker 88'GL VW Bus Driver Chelsea, AL Http://www.moldhaus.com

On 5/24/2010 4:47 PM, Jack Reynaert wrote: > Not sure what happened, but as we were following our friends 90 Westy > "automatic" on the highway, their motor just stopped as they were traveling > at 70MPH. > > About 60k miles on the engine. > > > > Good thing we were behind them in our Westy, as we were able to transfer > their stuff as they had it towed to a foreign car mechanic we found on > Autohaus (only 6 miles from their breakdown), had a nice dinner in Grand > Ledge MI, and drove them home to Detroit. > > > > No warning lights, no overheat, full battery power... when we pulled the > motor cover, both fan belts were off the motor and the starter wouldn't turn > the motor. > > Nothing leaking from below. > > > > There was a tapping sound upon acceleration, but that went away, and didn't > make the sound when in Park with engine rev. > > > > Sounds like a catastrophic failure eh? > > > > If the motor has failed, we will likely go with the Bostig conversion. > > > > Any ideas what might have happened, based on the clues above?!? > > > > Thanks! > > > > Jack R. > > 84 Westy > > > > On behalf of our Friends > > Chris& Bob > > 90 Westy > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.