Yup I'm in Winnipeg with my simple Canadian pump staring me in the face. Since i never had to prime the pump by sucking on it in the past I have to admit I don't want to start now. Besides if I suck I'll probably end up with a spider in my mouth. Maybe I'll start by blowing. Jeff On 2010-05-29, at 9:03 PM, Doug Alcock wrote: >>> but I have learned that >>> the pump sometimes has to be primed on my van. So I wrap my lips >>> around >>> the faucet, turn on the pump, and suck. > > Yes the pump can need priming. I'm pretty sure Jeff is from Winnipeg which > means he has a Canadian Westy with the water pump under the sink rather than > in the tank. That's what I have in my 84. I prime the pump by pulling > off the hose that leads to the tank for a second. The tank's pressure fills > the hose -- I then jam it back on the pump -- put the clamp back on and the > tap will now work. I had never though of the more intimate method described > above :-) > > Cheers, > Doug |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.