Date: Sun, 6 Jun 2010 19:57:49 -0700
Reply-To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject: Re: A new project..inline 4 VW van
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
hi Don,
post on the inline four group..
I'll watch for your posts and pics there.
I always find so many things to restore/upgrade/paint/treat for rust/improve
etc etc etc.
that it takes me 5 days to do an engine swap.
I have one of those dual outlet flanges on my 16 valve engine ..
gonna be a little bit of a challenge to make a good header/s to come off
there and still stay tucked up in properly.
it was good to learn the OBD-I ones have the piston oil sqirters and forged
crank.
Scott
----- Original Message -----
From: "Don Hanson" <dhanson928@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, June 06, 2010 7:37 PM
Subject: Re: A new project..inline 4 VW van
> Thanks for all the info, guys.
>
> Just got home with the motor...carried it in my van, of course. I think
> I
> really scored! It's very complete. It has the whole intake, the AC is
> complete, the PS pump is mounted, alternator, IAC valve in place, almost
> new
> silicone plug wires and a two pipe outlet exhaust manifold. Heck, I could
> probably make my hundred bucks back selling the AC and PS pump, which I
> won't use. Drained the oil and it looks clean, no metal shavings...no
> leaks
> on the motor. It's from a 94 Jetta so that is probably the older style
> OBD
> 1..
> anyhow, I will take this off the list now to avoid censure for a somewhat
> 'iffy' general topic of interest to the whole list. As I progress, I will
> post some pics and update as it gets done.. \
>
> Don Hanson
>
>
> On Sun, Jun 6, 2010 at 1:12 PM, pdooley <psdooley@verizon.net> wrote:
>
>> The ABA has 2 variants- an OBD1 and OBD2 version.
>> The OBD1 in the earlier MK3's is the better candidate as it has the
>> squirters and a forged crank.
>>
>> -----Original Message-----
>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
>> Of
>> neil n
>> Sent: Sunday, June 06, 2010 1:39 PM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Re: A new project..inline 4 VW van
>>
>> On Sat, Jun 5, 2010 at 9:01 PM, Don Hanson <dhanson928@gmail.com> wrote:
>> ....
>>
>> > My planned project is to pull the 1.8 liter and swap on the bottom end
>> of
>> > the 2 liter motor. The 2.0 liter ABA is supposed to put out about 25
>> more
>> > ponies and I am told they are better designed for lower RPM running
>> > with
>> a
>> > forged crank and some under the piston oil squirters.
>>
|