Date: Sun, 6 Jun 2010 12:04:40 -0700
Reply-To: Robert Keezer <warmerwagen@YAHOO.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Robert Keezer <warmerwagen@YAHOO.COM>
Subject: Re: [vanagon] Fwd: Pop-Top Canvas Replacement Video
In-Reply-To: <0F28AF44-3AB7-405D-BEE3-697B03B8109A@eoni.com>
Content-Type: text/plain; charset=iso-8859-1
Thanks, Jim.
I sent the canvas back I ordered and they told me it was the correct year and model.
Maybe seeing this video would have spared me a lot of trouble. Spent a whole day trying to install it with the pop-top on.
I saw the old canvas had the "pie-cuts", I did'nt do any cutting to the new canvas.
Then three friends helped me remove the top-all four of us could not get it to stretch.
If we tacked it down at one end first, the corners would'nt reach at the other.
No instructions came with the canvas.
It was the cheapest I could find, $199.00,
The canvas also weighs almost a pound less than the old original, doesn't have the welt on top, and the plastic edge on the bottm is only half the width of the original.
ANy recommendations ?
Thanks
Robert
1982 Westfalia
--- On Sun, 6/6/10, Jim Arnott <jrasite@eoni.com> wrote:
<forwarded with permission>
Curt Long (founding WetWesties member) filmed professional upholsterer
Kris Knight (Fine Auto Trim, Boise, ID) replacing the canvas on a late
Vanagon at last year's WetWesties/Bus Pilots ReUnion. This is how a
professional does it.
Jim
Begin forwarded message:
From: "Curt" <jc-long@comcast.net>
Repeat from the Wet Westies List, but since many Syncros also have Pop-
Tops, I thought this would be relevant here too:
Kris Knight was kind enough to come to the 2010 Union Reunion and
install my second Pop-Top Canvas in front of everyone.
I shot video of the entire event and have now finally assembled the
2-1/2 hour demonstration into a 16-1/2 minute final product.
This video is hosted on the Vimeo Site and I have saved it so that you
can download the video and pass it around or even reduce it to a
smaller format. However, to download it you need to register as Vimeo
User (it's free). You do not need to register if you only want to
watch the streaming version.
This was shot with a Canon HD Camcorder and exported at 1280x720 HD so
the file is about 730 Megabytes in size. but it will be on that site
for a long time.
Kris was a little far from the camera and his voice did not carry well
so I did my best to increase the volume to full when he talked while
dropping the volume back down to the bottom when I or others talked.
If I had it to do over, I would get much closer for better audio and
some close ups but this one will at least give you an idea of what's
involved. It's NOT a full day project if you follow Kris's tips and
instructions. And notice that he does it with no help.
The link is here:
http://www.vimeo.com/12165017
I have other non-Westy videos there too and of course, you are free to
view what
you want.
Enjoy,
Curt Long
Maple Valley, WA
P.S.
I might add for those with slower connections that you can turn off
the "HD" button for a faster load..
And if the streaming view pauses often while viewing, just pause the
video and let it finish loading before clicking the play arrow again.
__._,_.___
.
__,_._,___