I can say on a waterboxer they are slightly different left and right. if your ports line up , and there is no other reason why one side must be on it's correct side, I'd say you are all right. It's easy to get the intake port gaskets on backwards. one way is 'more right' than the other way. Have seen many of them installed incorrectly.
----- Original Message ----- From: "cesar quiros" <cesarquiros@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, June 07, 2010 1:19 PM Subject: 2.0L Intake question
I got a dumb question, I am putting a new engine in my AC 82 Westy. I have I just redid my intake/ fuel rail all prety and new clamps and hoses. So now my question is are both intake tubes (left and right ) the same, for teh life of me I cant remeber how I pulled them off and they look so close to being the same, so anybody out tehre know if they are the same part and does not matter left to right?
_________________________________________________________________ The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4= |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.