Got the Vanco 2's mounted on the CLK 16" rims and they fit the front with no issues or spacers and more than 7 full turns on the stock wheel bolts/nuts. Assuming the rears will do just as well. My question is do I torque these wheel bolts/nuts to the VW spec of 130 ft./lbs. or use whatever Mercedes recommends? P mail is fine if no one else is interested in this thread. Thanks DM&FS |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.