Date:         Wed, 2 Jun 2010 00:17:12 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: repairing arm rest
Comments: To: Malcolm Stebbins <mwstebbins@YAHOO.COM>
In-Reply-To:  <482081.79815.qm@web111713.mail.gq1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 04:59 PM 6/1/2010, Malcolm Stebbins wrote:
>One can use a blunt (cut off) nail the size of the tunnel to bang
>the pin out of the tunnel, or one can buy a real tool to do it.

Or even smaller, so long as you can catch one edge of the pin with
it.  8 mm is a pretty big nail.  But a punch like the one I made at
http://picasaweb.google.com/dbeierl/VanagonAdjustableArmrestPinAndDrivingTool?feat=directlink
makes it easier, particularly for reinstallation.

Yrs,
David

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.