Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2010, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 6 Jun 2010 04:44:50 -0700
Reply-To:     BenT Syncro <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT Syncro <syncro@GMAIL.COM>
Subject:      Re: Anybody else have a 2.2EJT in their Vanagon?
In-Reply-To:  <D773891C-F98E-431D-9522-42219F6AB6B9@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hello Folks,

Just following up on this query. Thanks to everyone who offered their assistance and suggestions. Special thanks to Dave Milo who sent the exact pics I needed to see to help identify the exact pump location. I've posted two of the photos he sent plus pics of my installation. As it turns out, the reason it was not immediately apparent (to me) where the PS pump was supposed to go is because one of the homemade engine carriers made by the previous owner used the pump bracket as a pick-up point. I plan to replace the carrier with a commercially available unit so that section again available for the pump. I have been planning on doing that anyway because the present system of welded pieces of square tubing and angle stock is challenged structurally and aesthetically. Pics can be found here:

http://tinyurl.com/2-2ejt-PS-Bracket

BenT

On Fri, Jun 4, 2010 at 3:40 PM, BenT Syncro <syncro@gmail.com> wrote:

> Hi All, > > Have the PS rack and all the lines and hoses installed in my 1984 GL with > the 2.2 EJT (1993 Subaru Legacy Turbo) engine. The engine has AC which > married to the VW system. Now I want to ad the Subie PS pump and marry that > to the VW lines. > > Trouble is I got the parts some years ago. Frankly, I have no clue how the > hardware comes together now. The late Warren Chapman posted pics of PS in > his 2.5 liter Subie on the SubaruVanagon group site. Although the pics have > given me an idea where the pump should go. Since the 2.2EJT is exactly a > popular conversion, I am asking everywhere. > > Worse case scenario, I dive in a play with the puzzle pieces. I was hoping > to make sure all the pieces are here before starting. > > > TIA, > > > BenT > >

-- BenT


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.