Date:         Mon, 7 Jun 2010 14:03:03 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: 2.0L Intake question
Comments: To: cesar quiros <cesarquiros@HOTMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

I can say on a waterboxer they are slightly different left and right.

if your ports line up , and there is no other reason why one side must be on
it's correct side, I'd say you are all right.
It's easy to get the intake port gaskets on backwards.
one way is 'more right' than the other way. Have seen many of them installed
incorrectly.


----- Original Message -----
From: "cesar quiros" <cesarquiros@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, June 07, 2010 1:19 PM
Subject: 2.0L Intake question


I got a dumb question, I am putting a new engine in my AC 82 Westy. I have I
just redid my intake/ fuel rail all prety and new clamps and hoses. So now
my question is are both intake tubes (left and right ) the same, for teh
life of me I cant remeber how I pulled them off and they look so close to
being the same, so anybody out tehre know if they are the same part and does
not matter left to right?



_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4=