Just pop the "horn" off (pull on it from the top) but hang onto it. It is connected by a female plug/wire and you'll have to pull that off before you can set the long horn aside. I think I use about a 20-22mm? socket and 1/2" drive breaker bar to loosen the nut. Once that's off, pull on the wheel side to side, top to bottom and it should just come right off. Oh, get the front wheels as straight as possible so you can just slide the S/wheel back on in the correct orientation. bob On Wed, Jun 9, 2010 at 11:33 PM, Craig Morton <rangermorton1972@yahoo.com>wrote: > My rack is in and darned if I didn't get the steering wheel out of kelter. > What is the easiest way to get it aligned again? > > Thanks. > > Craig > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.