Swepco 503 works pretty well. Used for some years now. At least it doesn't hurt.
On 6/11/10 8:48 PM, "Tom Hargrave" <thargrav@HIWAAY.NET> wrote: > A injector flush works well if you have buildup that is affecting your spray > pattern. If you don't have a buildup problem then a flush is worthless. You > can also have worn pintels (inside the injectors) and if you do the only > solution is to replace the injectors. They are not rebuildable. > > Techron is still a good cleaner & is probably the only off the shelf one > that actually works. > > I pour a bottle into 1/4 tank of gas instead of a full tank about 4 times a > year. I do this with every vehicle I own. > > Tom > www.towercooler.com > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.