Date:         Tue, 8 Jun 2010 22:45:13 -0400
Reply-To:     Kurt Grotz <kgrotz@CRAFTECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kurt Grotz <kgrotz@CRAFTECH.COM>
Subject:      Re: Clutch Question
In-Reply-To:  <257562.40851.qm@web111414.mail.gq1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

 Yes try all the options...master, slave, fluid, et el.  

However, I had same problem - it was a blown pilot bearing which I am in the
middle of. 

Good Luck



-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Stephen Cebula
Sent: Tuesday, June 08, 2010 8:55 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Clutch Question

Hi all,
I have question about my clutch:
Yesterday, all of a sudden, my van quit shifting.  At first it seemed to be
harder to shift into 1st and then it just quit.  There we're no warning
signs.  It shifts fine when the engine is off, but it stalls when I start it
in gear. The weird thing is that after trying a few times it seems to work
fine for a short time.  That makes me wonder if it's a hydraulic problem. 
But the pedal is still nice and firm. I didn't see any leaks.  Any ideas?
Thanks again,
Steve