Date:         Fri, 11 Jun 2010 23:27:11 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: manual transmission linkage
Comments: To: David White <sirgrumpsalot@gmail.com>
In-Reply-To:  <AANLkTinWZRC6upbzvhgLTbyPkEPs52XSZZZB3T_ebiDO@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Well if the Vanagon is white, that REALLY matters. In that case you'd
need to paint the linkage to match.   ;)

Pretty sure they're the same. Bentley should show this. And, you could
check the listings for bushings etc. on GW, BD or Van-cafe sites. The
linkage length should be the same assuming both donors are 4 spds.

btw, I"m sure there's info here, but there's also at least one write
up on the swap somewhere on thesamba.com

Neil.

On Fri, Jun 11, 2010 at 10:06 PM, David White <sirgrumpsalot@gmail.com> wrote:
> Are there differences in the manual transmission linkage from
> 1984-1987? I need to know. Any differences in the shifter, the shifter
> housing, the length of the linkage underneath, the joint on the
> transmission??? I am trying to convert an 84 automatic to manual using
> linkage from an 86 and an 87. how about differences in the master or
> slave cylinders?? The vanagon is white if that matters.
>
> Thanks,
> David
>



--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines